ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
My BM5000 has lost its memory.
I have chanced the 3 V back-up batteri on PCB04, but it did not cure the memory.
The radio works fine, but the stored stations disapper immediately.
I have controlled the two diodes D4 and D5 on PCB04. D4 seems fine (0,6 V), but D5 has 1,7 V, which I think is too much. Maby this is the problem.
I would like to hear if anyone has an opinion on this, before I go to the solder iron.
Thank you!
Poul