BLGW - costum string – http request as a trigger for a button feedback in the beolink app

Reply

beoandy Posted: Sat, Mar 5 2016 11:39 AM

rated by 0 users

24.png

Hi, I upgraded from the mlgw to the blgw. I also use the lightmanager air to control all my lights in the flat. I use custom strings like POST /control?key=10 HTTP/1.1\0D\0A\0D\0A to control the lightmanager with the blgw. That is still is very good working.

Now I have the possibility to send http requests back from the lightmanager to the beolink gateway to get a trigger for buttonfeedback in the app. Therefor I need a http request send to the blgw.

Enclosed you see a screenshot of the software of the lightmanager. I can fire PUT and GET requests.  (the example shows the string for the Philips hue)

I now look out for a simply string  that can send back to the blgw and can be captured for a trigger.

Beocare says there a two possibilities:

A)   hex based mlgw protocol  on port 9000  http://mlgw.bang-olufsen.dk/source/documents/mlgw_2.24b/MlgwProto0240.pdf

B)   HIP protocol on port 9100 (document also enclosed)

I reed the documents to both protocols, but I need now a pair of  fully strings to see how they single parts must be put together.

For the mlgw protocol I can deactivate the authentication (for testing) but in the final string i must the authentication integrate in the string.

Thanks for your support!

beoandy

Reply

beoandy replied on Sat, Mar 5 2016 11:40 AM

rated by 0 users

HIP.pdf

and here the documentation for the HIP protocol on port 9100

Reply

beoandy replied on Wed, Mar 9 2016 3:16 PM

rated by 0 users

any hints?