ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
to use my BV10 including its speaker, I need to convert a powerlink signal (from BS3) to S/PDIF.
Is there any product PL to S/PDIF around ?
Kind Regards
Tom
OK, got it - I will use an PL to RCA connection and put this signal into a normal analogue to digital converter...
May I ask you, why you want to do the conversion?
Why not use a simple MasterLink connection?
MM
There is a tv - and there is a BV
Hi MM,
sure you can do. I want to add a BS3 to my living room for homecinema reason. Due to the fact, that the existing BV10 isn´t able to control a beamer nor to "switch" the Beolabs to different setups and furthermore isn´t able to handle 7.1, I need a solution. I am no allowed to get rid of the BV10...
I will use the BV10 for TV controlled by BS3 and need the center PL-connection from BS3 to use the internal speaker as center. So I am in need to convert the PL signal to SPDIF to define "TV" on the BV10 using HDMI1-input for TV and SPDIF1 for audio - both coming from BS3.