Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beovox 2500 Cube Wiring

rated by 0 users
This post has 4 Replies | 0 Followers

Ben_S
Top 150 Contributor
UK
Posts 631
OFFLINE
Bronze Member
Reply
Ben_S Posted: Sun, Apr 3 2016 11:12 AM

Dear All

My Beovox 2500 need their wiring replaced. I see that the wiring goes through the metal centre of the cube. 

Does the metal pole unscrew from the cube itself to reveal the wiring? I don't want to force anything!

Thanks

Ben

chartz
Top 25 Contributor
Burgundy, France
Posts 4,171
OFFLINE
Gold Member
Reply
chartz replied on Sun, Apr 3 2016 2:09 PM

You have to remove a tweeter. Have a look here and there.

 

Jacques

Ben_S
Top 150 Contributor
UK
Posts 631
OFFLINE
Bronze Member
Reply
Ben_S replied on Sun, Apr 3 2016 2:11 PM

Thanks Jacques!

Yes - thumbs up

chartz
Top 25 Contributor
Burgundy, France
Posts 4,171
OFFLINE
Gold Member
Reply
chartz replied on Sun, Apr 3 2016 2:13 PM

Do be extremely careful when you pull the grille: I used a hook (a paper-clip, really) and used two holes of the cover to pull it. It should show some resistance because it is glued in place.

Also, be careful not to pierce the cone!

Oh, and replace the cap while you're in there!

Jacques

Ben_S
Top 150 Contributor
UK
Posts 631
OFFLINE
Bronze Member
Reply
Ben_S replied on Sat, Apr 9 2016 7:39 PM

Thanks Jacques, 

all good advice, and I will replace the cap!

Ben

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly