ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
I have installed a pair of Beolink Wireless 1 in my house. Although they are quite close together the audio signal cuts out all the time. I suspect the devices are set to auto and jump radio channels (there are a lot of wireless networks around me). How do i hardcode the wireless channel on the Beolink Wireless?
Thanks,
Koert
To my knowledge, the latest sw allows the wireless 1 to be set to either channel 1, 6, 9 or Auto.
How that is done, I´m not sure.
Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Homeoffice: M3, Beocom 2 Library: Beosound Emerge, Beocom 6000 Bedroom: M5, Essence remote Travel: Beoplay E8 2.0, Beoplay EQ, Beoplay Earset
Note also that they need to be at least 5 meters apart according to the manual.
Hiort:To my knowledge, the latest sw allows the wireless 1 to be set to either channel 1, 6, 9 or Auto. How that is done, I´m not sure.