ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
I'm using a BV7-40 (DVI) and connected a HDMI splitter.
Picture here but with some white horizontal line every 5cm approx.!!! (with and without 2 output connected)
Same problem with other cables and with another splitter...
Of course picture ok witout the splitter.
Does anyone has some experiences with splitter?
Thanks
I used an Atlona 3 way HDMI splitter when I had my BV7-40 III ten years ago without any problems at all. In fact I highly recommend it and may still have it in the garage somewhere. What makes you think the splitter is causing signal or picture interference? Simon.
B&O products are V1-32, BS2, H95, E8 and an Essence remote.11-46 now replaced with Sony A90J 65”, Sony HT-A9, Sony UBP-X800M2 and Sony SRS-NS7.
Thanks for your answer.
Tried all cables without splitter, and the picture is always fine! Changed the splitter with another one, same problem -> I think that something is wrong between the BV and this splitter.
There's a hdmi switch from Gefen around which is supported by the BV7 if your software is up-to-date.
Don't know the excact model, but you might do a search here or on the archived forum.
EDIT: Did a quick search and found this
Martin
BeoSound 9000 MK3, BeoLab 8000, BeoLab 6000, BeoLab 3500, LCS9000, BeoLab 11, BeoLab 7.2, BeoLab 7.1, Beolab 4 PC, BeoCenter 2300, BeoSound Century, BeoSound 8, Beosound 2, BeoVision 7-40 MK2 , BeoVision 7-32 MK3, BeoVision 6-22, BeoVision 4-42, BeoMedia 1, BeoCom 4, BeoLink 1000, BeoLink 5, BeoLink 4 & BeoTime