Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beosound Century line out -where ,how to ?

rated by 0 users
This post has 3 Replies | 1 Follower

marexy
Top 150 Contributor
Posts 710
OFFLINE
Bronze Member
marexy Posted: Thu, Oct 27 2016 12:04 PM

Hi :)

From my BS Century want to mount connector for line out.
want to connect up  active woofer or amplifier.
I have tried to carry out signal from the headphone jack and the signal is distorted.
Please advise if someone allready done that ?

Thanks for all opinions.

marexy
Top 150 Contributor
Posts 710
OFFLINE
Bronze Member
marexy replied on Fri, Oct 28 2016 12:43 PM

Nobody done it ?

Iti will be nice to add some active woofer to it :)

Guy
Top 50 Contributor
Warwickshire
Posts 2,590
OFFLINE
Gold Member
Guy replied on Fri, Oct 28 2016 1:27 PM

I don't have a century and haven't tried.

However, you may well be able to use the DIN aux socket at the back.  The set-up manual says that this is an AUX input only, however if you look at the circuit diagrams, then PINs 1 and 4 appear to be AUX out at line level.  All these manuals are available on site to silver and gold members.

Hope this helps!

 

Guy
Top 50 Contributor
Warwickshire
Posts 2,590
OFFLINE
Gold Member
Guy replied on Fri, Oct 28 2016 1:30 PM

I would buy something like this, so you can use both an AUX input and the line output (if it works) at the same time: https://www.amazon.co.uk/Male-Phono-Plugs-Audio-Cable/dp/B008N29OSG/ref=pd_cp_107_2?_encoding=UTF8&psc=1&refRID=5VTF851WZYEJ2V84FKSW

Page 1 of 1 (4 items) | RSS