ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
A purchase of the new Beosound 1 speaker is proving frustrating due to lack of any instructions - for instance, what do the colours on the acoustic lens mean? Orange, red, blue white?
This should be covered by the link https://support.bang-olufsen.com/hc/en-us/categories/200855619-main
Beo Century ,Beoplay V1, Beocenter 6, Ex-Beolit 12, Beotime , A8. Beolit 15 , Form 2i , Beolab 2000, Beoplay A3.Beosound 1
BeoNut since '75
In the FAQ section on the link;
slowly
Starting up
White solid
Connected to network, ready for use
Blue flashing fast
Bluetooth pairing ongoing
Blue shortly
Bluetooth connection successful
Red shortly
Bluetooth connection unsuccessful
Blue solid
When not configured to network and not in configuration mode
Amber flashing fast
Ready for network setup. Soft AP / WAC mode.
Amber flashing slowly
Connecting to network
Amber solid
Wireless connection of medium quality
Red solid
Wireless connection of poor quality
Red flashing fast
Failed to connect to wireless network
Status LED and lens LED simultaneously
Red, one flash
Factory reset
Red flashing slowly
Updating software
elephant:I don't have it but a dealer told me yesterday that there is a colour deciding sheet. She was going to send it to Michael H. BeoNut since '75
Aussie Michael:To me ?
Thanks Simon, I have now been to the link and seen your list there - but you still cannot beat old fashioned written instruction books....
elephant: Aussie Michael: To me ? So Annie said, but thanks to Simon you needn't wait !
Aussie Michael: To me ?
To me ?
Thanks Ed :-). Well i hadn't received anything. Thanks Simon.