Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

MX4000 help

rated by 0 users
This post has 2 Replies | 1 Follower

timson72
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
timson72 Posted: Wed, Dec 14 2016 6:06 PM

Hi,recently got MX4000 to do some retro gaming,TV didn't have a remote,got an aftermarket replacement,all works OK but I can't switch to AV1 or 2 ,am I missing something or is it a TV fault?

Peter
Top 10 Contributor
Earsdon
Posts 11,991
OFFLINE
Founder
Reply
Peter replied on Wed, Dec 14 2016 9:43 PM
MX4000.jpeg

You need to program the MX sockets - have you got the manual? You go to the menu and you can then set the connections - usually AV1 is V.Tape, AV2 can be CDV and you can also allocate the S-VHS socket to another source. It is all easier with a Beolink 1000! I attach the relevant page!

 

Peter

timson72
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
timson72 replied on Thu, Dec 15 2016 8:31 AM

Thanks for reply mate,managed to figure it from some trial and error and googling

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly