Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolight LC2 stopped working

rated by 0 users
This post has 1 Reply | 1 Follower

jviala
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
jviala Posted: Thu, Feb 9 2017 2:49 PM

Dear B&O users,

668/5000

Since 3 days my 3 beolight LC2 no longer work. I can only activate 2 of them by hand.The third turns on with the Beo4 and then turns off alone after 1 hour of operation. I can turn it back on again and then it goes off after about 30 minutes of operation. The most surprising is that at night it lights up alone at least twice!
I also have a LC1 beolight that only works manually (since the same day) it no longer responds to my Beo4 remote. I can not adjust the height of the light: it is only 100% or 0%.
A user posted the same type of problem in 2014. After a few days everything would have returned to order.
Have you had this kind of problem ?. I'm worried about whether everything will go well as before. Thank you
cordially
MADSYSTEMES ZANUSO
Not Ranked
Paris
Posts 29
OFFLINE
Bronze Member
Reply
MADSYSTEMES ZANUSO replied on Sat, Feb 18 2017 7:45 AM

hi

the lc2 can be repair, contact local service center

if you are in Paris, contact Mad service center http://www.bang-olufsen-sav.com

Regards

Mr ZANUSO

 

Page 1 of 1 (2 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly