Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BeoSound 3 battery replacement

rated by 0 users
This post has 2 Replies | 1 Follower

Steph
Top 100 Contributor
France
Posts 1,059
OFFLINE
Bronze Member
Steph Posted: Sat, Mar 4 2017 12:37 PM

The battery of my BeoSound 3 needs to be replaced (circa 15 minutes at moderate level).

The touch panel, the antenna and the loudspeaker are fine.

A dealer charge me 150€, it's too expensive!

Do you know if :

- I can find an equivalent battery model?

- Can i change the battery myself? I didn't find any instructions on BeoWorld or on the net.

Thanks

TWG
Top 75 Contributor
Posts 1,672
OFFLINE
Gold Member
TWG replied on Tue, Mar 14 2017 10:09 AM

Here's a topic of repairing the top plate. Might help you to get the battery out:

http://archivedforum2.beoworld.org/forums/p/1432/85173.aspx#85173

 

 

timbenham
Not Ranked
Posts 7
OFFLINE
Bronze Member
timbenham replied on Fri, May 15 2020 10:47 PM

Battery replacement is very simple - remove 4 screws on the base plates, disconnect two wired junctions and the earth from the PCB. Remove the screw holding the battery in place and it just slides out. You will see the tab on the end of the battery to pull it by. It is padded - which my have broken down and stick to the battery slot - but it will easily remove

Page 1 of 1 (3 items) | RSS