Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beomaster 2000 Programming Lid Repair

rated by 0 users
This post has 6 Replies | 1 Follower

Holmfirth
Not Ranked
Posts 10
OFFLINE
Bronze Member
Reply
Holmfirth Posted: Thu, Jun 8 2017 3:48 PM

After 30+ years of service, my Beomaster 2000 programming lid has failed.  The plastic arm that is connected to the metal cover and carries the spring has snapped.  Has anyone been able to repair this arm? 

Saint Beogrowler
Top 150 Contributor
Saint Paul
Posts 780
OFFLINE
Bronze Member
Reply
Saint Beogrowler replied on Thu, Jun 8 2017 6:03 PM
I used a plastic specific epoxy and painted it black on a similar BM 3000.
Holmfirth
Not Ranked
Posts 10
OFFLINE
Bronze Member
Reply
Holmfirth replied on Fri, Jun 9 2017 6:46 AM

Excellent.  Is there a brand of expoxy you can recommend?

marc
Not Ranked
netherlands
Posts 78
OFFLINE
Bronze Member
Reply
marc replied on Fri, Jun 9 2017 8:37 AM

JB Weld works great!

Saint Beogrowler
Top 150 Contributor
Saint Paul
Posts 780
OFFLINE
Bronze Member
Reply
Saint Beogrowler replied on Fri, Jun 9 2017 11:03 AM
I just used a generic store brand plastic epoxy.
Holmfirth
Not Ranked
Posts 10
OFFLINE
Bronze Member
Reply
Holmfirth replied on Sun, Jun 11 2017 5:59 PM

Thanks everyone for the info/encouragement.  Used Loctite Epoxy.  Cure time will end later this evening.  Initial results seem encouraging.

Holmfirth
Not Ranked
Posts 10
OFFLINE
Bronze Member
Reply
Holmfirth replied on Mon, Jun 12 2017 3:42 AM

Time Gents....I think I nailed it.  Thanks, Lads.  Holmfirth.

Page 1 of 1 (7 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly