ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
The platter on my TX2 really sits close to the plinth and its very tough to take a LP off and cant use my discwasher brush as it pushes down too much on the platter and it scrapes....and I don't push that hard as just trying to get dust off rather than clean the LP...thoughts??
It sounds as if it might be in transport mode. Without flipping the turntable upside down, fully loosen the three large screws located on the underside of the turntable. They won't come out.
Have tried that but will do it again just to make sure...thanks!