Beolab 3 wireless

Is it possible to make the Beolab 3 wireless? So both the left and the right speaker only have a wire to the power outlet on the wall?

I want to get the Beolab 3, but I don't have the possibility to wire them from the left to the right of the room.

You can do this with a beolab transmitter 1 and two receivers (one for each BL3). But you will still have a (presumably short) wire from each speaker to a receiver and also the receivers need power.

Yes you can daisy chain the Beolab 3s

Source -------- left ---- right

But you can cable both directly

left ------ Source ------ right

You can always cable tie (or use a cable sock) to contain the source cable and power cable together to a wall socket and then run the source cable inside the wall.

In the FLASH your B&O thread you will see many examples of this.

Also examples of discrete cable ducts that blend in to the wall.

You can buy a Receiver 1 if your Source is WISA capable. Or also buy a Transmitter 1 to make your Source WISA like.

But you will still have to run a second power cable to the Receiver 1 and then still have a source cable to the speakers.

There is no variant of the BeoLab3s that has WISA built in.

The smallest WISA speakers are the BeoLab 17s (I believe).