Beogram 4002 type 5511 starting issue check video

Reply

kbaelden28 Posted: Tue, Nov 21 2017 6:45 PM

rated by 0 users

Hi guys,

After restoring my first beogram 4002 type 5511 I recently acquired a second one from a  smoker and it needs quite a lot of cleaning.

Apart from that it also appears to have a mechanical problem, when I push the start button both motors start spining for about a second and I hear the relais of the carriage click but then it immediately stops and it seems to bounce back just a little bit.

The drive shaft is not stuck and I can manually rotate the shaft and arm to the middle. When I power the turntable on the arm moves back to its starting point without any problems.

I made a video https://youtu.be/uuzc8wVYSWQ  , the noise you hear on the background is from the platter motor, it doesn't make a sound when the belt is installed. 

Did not take it apart yet but would like to know if this is a common issue, mechanical/components failure... 

Thanks for all your help.

Kristof

Kristof

Format: ???
Duration: --:--

Reply

kbaelden28 replied on Wed, Nov 22 2017 8:39 PM

rated by 0 users

Hi,

I just upgraded to silver but can't find the service manual for a Beogram type 5511 ? Does anyone have a copy ?

Thanks 

Kristof