Mid 70's Beogram 3000 tonearm doesn't set down close enough to starting grooves

Reply

Vox_T Posted: Thu, Oct 11 2012 5:14 PM

rated by 0 users

Does anyone know how to adjust the set down point on the older 70's model Beogram 3000? Thanks!

Reply

Søren Mexico replied on Thu, Oct 11 2012 5:45 PM

rated by 0 users

Here, and manuals are available on site for silver and gold members

Reply

Vox_T replied on Thu, Oct 11 2012 6:08 PM

rated by 0 users

Thank you, how do i get to these screws?

Reply

Søren Mexico replied on Thu, Oct 11 2012 6:20 PM

rated by 0 users

There may be 2 holes in the bottom cover, like the ones in the middle of the pic, here a pic from my 1202, and here more about my 1202, the 3000 is about the same.

Reply

Vox_T replied on Thu, Oct 11 2012 6:53 PM

rated by 0 users

Ah, thank you. Now i see the adjuster screws!

Reply

Vox_T replied on Thu, Oct 11 2012 7:21 PM

rated by 0 users

Well i adjusted the screw both ways and it is having no effect on arm touch down placement. It always sets down at the same point.

Reply

Søren Mexico replied on Thu, Oct 11 2012 9:43 PM

rated by 0 users

Take of the bottom cover and clean and lubricate everything, check if the white "wheels" moves when you turn the screws, and do you have the same problem with 33 as with 45 RPM records