ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello Beoworlders
my BV7 MK3 is not switching on anymore
the RED standby light appears but nothing else
i have used different commands on the BEO4 and disc tray bit nothing happens
I have unpluged it from mains and that does not work did not even ask for a PIN code
any ideas would be appreciated
Start by checking the obvious, -the BEO4
If its sending codes, you should be able to see the two IR diodes as two small purple dots with a digital camera.
Volume up/down will send codes continuously as long as the key is pressed.