Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

Beogram 3404 dust cover assembly

rated by 0 users
This post has 2 Replies | 0 Followers

chucktaylor27

Posts 5

OFFLINE

chucktaylor27 Posted: Thu, May 3 2018 11:40 PM

rated by 0 users

Hello all,

I mistakenly thought I could adjust the dust cover on my Beogram 3404 last year and in doing so broke the clips that hold the tension spring in place. I was able to purchase some replacements but it's been so long I don't recall how everything goes back together. There are 3 stainless or aluminum pcs that came out at the same time.

Does anyone have any closeup pictures or instructions on how to put this back together? Is it best to remove the whole assembly from the chassis? I'm assuming the dust cover is similar to those on the 2200/2400/3400 since they are listed on the same service manual?

Thanks very much!