Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beocenter 3500 belt has come off

rated by 0 users
This post has 4 Replies | 1 Follower

nigelcalvert
Not Ranked
Posts 30
OFFLINE
Bronze Member
Reply
nigelcalvert Posted: Wed, Jul 25 2018 7:44 PM

I’ve just got a ‘new’ Beocenter 3500 and the belt has slipped off. I’ve searched for instructions about how to refit it but no luck. Any advice please? I’ve lifted the actual turntable off and can see an idkerbwheel? And loose belt. Thanks very much. 

nigelcalvert
Not Ranked
Posts 30
OFFLINE
Bronze Member
Reply
nigelcalvert replied on Wed, Jul 25 2018 7:47 PM

* idler wheel 

nigelcalvert
Not Ranked
Posts 30
OFFLINE
Bronze Member
Reply
nigelcalvert replied on Wed, Jul 25 2018 8:29 PM

Sorry - I just realised there is a groove all the way round the sub platter that it slots into. Easy enough job.

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Wed, Jul 25 2018 9:07 PM

Make sure you have the three transport screws losened, or it will come off again.
It will also come off if it's still the original belt because it will have stretched from age.
I can still supply new belts and idler wheels.

Martin 

nigelcalvert
Not Ranked
Posts 30
OFFLINE
Bronze Member
Reply
nigelcalvert replied on Wed, Jul 25 2018 9:18 PM

Thanks for advice, Martin.  Good to know!

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly