Updating Speaker Choice List

Hey Guys,

Does anyone know how I can update speaker option list on Beovision 7-55

I bought a pair of Beolab 12-2 and don’t have them as an option on my Beovision 7-55

Thank you for the help in advance. 

 

It would require a technician/dealer to do it, assuming there is even an update including the 12s available. There was a document I saw a couple years ago describing what speakers to use in the 7-55 if one’s speakers were not included in the menu. Based on that document I have my 12-3s as rears set as Beolab 3s. If my memory is correct, it also included some adjustments to be made to the distances to be used in the set up menu.

I had a BeoSystem 3 updated this summer to the latest software and it shows BeoLab 12-3 as an option, but it doesn't show 12-2.

I found the info dealer gave me. It says to set up 12-2s as 6000s and add 1.5 meters to the distance to accommodate the difference in processing time.

Thats fantastic! Thank you :) Razlaw

 

Adding 1,5 meters will do the trick! If you are interested why, this article by the Geoff is great: https://www.tonmeister.ca/wordpress/2017/12/06/bo-tech-beolab-loudspeakers-and-third-party-systems/. I would also recumbent reading the article about how to properly setup a multichannel system. No dealer, quite sadly, has done a good job of doing this for me, ever!