Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Will this work ? Connecting Beosound moment to AVR.

rated by 0 users
This post has 5 Replies | 1 Follower

IA64
Top 500 Contributor
Posts 135
OFFLINE
Bronze Member
Reply
IA64 Posted: Tue, Nov 20 2018 6:15 AM

My setup consists of 5 zones. 

 

1 independent zone : BV Avant NG / Beosound moment / BL20s

4 zones connected to a Crestron multiroom AMP.

 

I am trying to connect the B&O steaming source so it can play in the whole house.  Would connecting a WISA receiver  1 using this cable to the line in of the AMP do the job ? 

https://soundsheavenly.com/bang-olufsen/65-365-rj45-powerlink-compatible-to-twin-phono-cable-output-from-new-bo-devices-to-amps-receivers-etc.html#/length-5m

 

Thanks.

Hiort
Top 50 Contributor
Sweden
Posts 2,895
OFFLINE
Bronze Member
Reply
Hiort replied on Tue, Nov 20 2018 7:18 AM

What you get out from Moment using that cable is (as I understand it) is a line level signal, so you need a line level input in your amplifier. I assume it could work that way. 

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Homeoffice: M3, Beocom 2  Library: Beosound Emerge, Beocom 6000 Bedroom: M5, Essence remote  Travel: Beoplay E8 2.0, Beoplay EQ, Beoplay Earset

IA64
Top 500 Contributor
Posts 135
OFFLINE
Bronze Member
Reply
IA64 replied on Tue, Nov 20 2018 7:59 AM

The moment and the AMP are not in the same room that's why i thought a receiver 1 might help. But how to power it on?

 

Sorry if i have zero experience with powerlink.

IA64
Top 500 Contributor
Posts 135
OFFLINE
Bronze Member
Reply
IA64 replied on Tue, Nov 20 2018 7:59 AM

The moment and the AMP are not in the same room that's why i thought a receiver 1 might help. But how to power it on?

 

Sorry if i have zero experience with powerlink.

Hiort
Top 50 Contributor
Sweden
Posts 2,895
OFFLINE
Bronze Member
Reply
Hiort replied on Tue, Nov 20 2018 8:51 AM

The Receiver 1 made to wirelessly receive a Powerlink connection using the WISA standard. Would you use Moment to transmit?

Where you thinking of connecting the received to Cretron?

I doubt that its possible.. Also, this WISA connection will not work between different rooms. 

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Homeoffice: M3, Beocom 2  Library: Beosound Emerge, Beocom 6000 Bedroom: M5, Essence remote  Travel: Beoplay E8 2.0, Beoplay EQ, Beoplay Earset

Steve at Sounds Heavenly
Top 50 Contributor
The cable workshop, Leics, UK
Posts 2,165
OFFLINE
Gold Member
Reply
Steve at Sounds Heavenly replied on Tue, Nov 20 2018 6:30 PM

Hi IA64,

Yes, you can take a line output from a Powerlink socket of the TV to the Crestron system with this cable - you can assign this Powerlink socket to any two audio channels (eg. front left/right) and also assign them as fixed line level volume if you wish within the TV menu.

If you decide to use a wireless link, then please note that you will need a Transmitter 1 plus two Receiver 1s for stereo sound, as each Receiver 1 is mono only.

Please feel free to get in touch via my sponsor link below and I will be happy to help you to find the best way to get everything working.

Kind regards, Steve.

Steve.

www.soundsheavenly.com

Founder of Sounds Heavenly Cables and Brand Ambassador for Bang & Olufsen

Sounds Heavenly are proud to sponsor BeoWorld!

Please check out my YouTube channel at https://youtube.com/soundsheavenlycables

Page 1 of 1 (6 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly