Beogram 5500 does not spin, block or stuck

Reply

Ignacio Posted: Sun, Nov 25 2018 10:39 AM

rated by 0 users

Hello,

I have recently bought a BG 5500 that refuses to spin, the platter is stuck or blocked.

To open the TT I had even to disconnect the carriage wire to move the tone arm and detector to the center position to raise the system.

Gears are block, no spins, I guess something (gear) most be out of postion but I can't see anything in the wrong position.

¿Did someone experiment the same problema? ¿Any recommendation to fix it?

¿Is it possible to find a clear description of how to dismantle the pinions and gears?

Any help would be more tan welcome.

Thanks you so much 

Reply

Ignacio replied on Sun, Nov 25 2018 5:54 PM

rated by 0 users

Hi,

Yes I did.

I have encouraged myself to dissamblenging the upper pinion, the ones which move the arm, I'm on this.

I think that the gear was out of place.I will come back with my findings and hopefully sa soliution.

Thanks  

Reply

Ignacio replied on Thu, Nov 29 2018 7:59 PM

rated by 0 users

Hi Leos,

Solved!

The big gear was out of place.

Now seems that will work.

Regards

Reply

Ignacio replied on Thu, Nov 29 2018 7:59 PM

rated by 0 users

Hi Leos,

Solved!

The big gear was out of place.

Now seems that will work.

Regards