Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BEOMASTER 3300 - help request

rated by 0 users
This post has 2 Replies | 1 Follower

iantimothy
Not Ranked
Posts 4
OFFLINE
Bronze Member
iantimothy Posted: Wed, Jan 23 2019 1:02 AM

hi there. long time owner/lover of RX2 turntable, now trying to help a friend repair or at least diagnose a BEOMASTER 3300. 

System has 3300 turntable, cd player and cassette deck, but so far i cannot tell if any of those work because the receiver does not really power on. when plugged in, there are 2 yellow lights above the power button. no buttons on the unit do anything.

sometimes when plugged in the word STEREO lights up yellow (temporarily) as well, but not always.

is this likely a power issue- or perhaps an issue with the board behind the button strip?

note that i am good with a solder iron, bad with schematics & have a fully featured multi-meter. ready to do whatever i can to rescue this beautiful system.

thanks, ian

 

marco
Not Ranked
Turin
Posts 65
OFFLINE
Bronze Member
marco replied on Wed, Jan 23 2019 1:10 PM

Hi Ian

maybe a bad contact of AC main switch, check that and let us know

Have a nice Wednesday

MArco 

iantimothy
Not Ranked
Posts 4
OFFLINE
Bronze Member

Marco- thanks for the reply. I am clearly in no real rush to get this done, but picking up the torch for the project again now.

I think i need some hand holding to test this. I'm unsure where to meter the AC main switch.

 

Thanks,

Ian

 

Page 1 of 1 (3 items) | RSS