ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
There doesn't seem to be a command in the BeoRemote One to access the AV input on the Beovision 11 mk2. I've tried adding all the sources on the remote but none of them will activate the input.
There is one labeled AV IN on the remote but it activates the radio instead. Is this a bug? I will have to use the menus to access this source instead of the TV or MUSIC source buttons on the remote. Very frustrating.
This used to work when using the Beo4 remote, but there is no such option when the TV is configured to use a BeoRemote One.
If you have started the AV IN source from the Source Menu, can you then assign a MyButton to it?
If yes, that might be a workaround.
MM
There is a tv - and there is a BV
lundmark:This used to work when using the Beo4 remote, but there is no such option when the TV is configured to use a BeoRemote One.
Best regards - Dyssegaard
Living room: Beovision Eclipse 55, Beolab 3 / R1 (back), Beolab 2 / R1 (sub), AppleTV 4K. Bedroom: Beovision 11-40, AppleTV 4. Home office: Beoplay M5. Kitchen: Beoplay M5. Travel: Beoplay H8, Beoplay A1. NAS: WD My Cloud Home / Plex DLNA Server.
Millemissen: If you have started the AV IN source from the Source Menu, can you then assign a MyButton to it? If yes, that might be a workaround. MM
Yes, that's what I need to do I think.
madskp:I havent tried a beoremote one, but shouldent the source be the same as on a BEO4; V.MEM for example if thats the dource assigned to the AV In port? What source button did you use on the BEO4?
What source button did you use on the BEO4?
I could use any button, because the source menu allowed for setting any of the buttons. This is not the case if the TV is set to use the BeoRemote One. Then you cannot assign buttons—the remote is supposed to have all the commands listed.
Dyssegaard:On my BeoRemote One BT I’m able to add AV IN under TV sources for my BV 11 - see screen shot below:
Yes! It's there but it starts RADIO on my TV for some stupid reason! I
lundmark:Yes! It's there but it starts RADIO on my TV for some stupid reason! I
Makes sense. I’ve reset my remote and the issue persists. Somethings going on with the TV
Could you perhaps post a picture (probably two) of the Source Menu of the tv?
It would appear the (SOURCE) in the parenthesis is the 'button' that will activate it.If so then it makes sense that AV IN does not activate. However I don't know how to configure these.
What are your options under Från Standby?
It is now set to Inga (which I suppose means Nothing).
Yeah, it's set to none. The only options are None and TV. When set to TV, the TV button on the remote starts the Beovision on the AV input, so that works as expected. But it's not really how I'd like it.
lundmark: Yeah, it's set to none. The only options are None and TV. When set to TV, the TV button on the remote starts the Beovision on the AV input, so that works as expected. But it's not really how I'd like it.
What would you expect to happen, then?
Isn’t the TV command/button ok?
That option is to turn on the source from standby, not switch to it when the TV is already on. I would prefer to be able to access it from the source list in the remote
Correct but I’m not interested in the standby start feature. I just want to be able to switch source from the remote’s menu, but none of the menu items take me to the correct input