ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hallo b&o Freunde,
ich habe ja ein 7000 Beosystem und Beolab Penta mk3 Lautsprecher.
Reichen 7 polige Dinkabel oder muss ich 8 polige Dinkabel verwenden?
konkret fehlt der mittlere Pol.
gruss und Dank
Christian
Hallo Christian,
Sorry for replying in English. The middle pin of the cable (pin 8) is not needed, but all other 7 pins must be connected in the cable for the speakers to work correctly with the display working. You need a fully wired Powerlink mk.2 cable to get the speakers working correctly:-
https://soundsheavenly.com/powerlink-8-pin-din-connection/23-2551-powerlink-mk-2-compatible-black-8-pin-din-cable-with-fully-wired-8-cores.html#/2-length-1m
Kind regards, Steve.
Steve.
www.soundsheavenly.com
Founder of Sounds Heavenly Cables and Brand Ambassador for Bang & Olufsen
Sounds Heavenly are proud to sponsor BeoWorld!
Please check out my YouTube channel at https://youtube.com/soundsheavenlycables