Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 17 rattle

rated by 0 users
This post has 3 Replies | 1 Follower

Michael
Top 50 Contributor
Sweden
Posts 2,578
OFFLINE
Bronze Member
Reply
Michael Posted: Fri, Apr 19 2019 9:15 PM
Hello, a friend of mine complains that his Beolab 17 rattles a lot and that they seem to be badly designed. I haven’t experienced that when I’ve listened to them and I’ve been considering replacing my office Beolab 4000 with 17s sometime perhaps.

Have any of you had any issues like this? He has them wall mounted.

Beolab 50, Beolab 8000 x 2, Beolab 4000 x 2, 
BeoSound Core, BeoSound 9000, BeoSound Century, 
BeoLit 15, BeoPlay A1, BeoPlay P2, BeoPlay H9 3rd Gen, BeoPlay H6, EarSet 3i, 
BeoVision Eclipse Gen 2 55", BeoPlay V1-40, 
BeoCom 6000 and so much else :)  

Mikipidia
Top 50 Contributor
Posts 2,169
OFFLINE
Bronze Member
Reply
Mikipidia replied on Fri, Apr 19 2019 9:30 PM
Tighten the wallmount to begin with? Never heard of this befor... maybe have a look at the speaker fret and see if it has come loose?

New: Beovision Harmony, Beolab 50's, Beolab 28's, Beolab 18's, Beolab 17's, Beosound Stage & LG, Beosound 2, Beoplay M3, Beoplay A1, Beoplay Portal, Beoplay H4 gen 2, Beoplay E8 3.0

Mikipedia on YouTube: https://www.youtube.com/c/Mikipedia

Mikipedi4 on Twitch: https://www.twitch.tv/mikipedi4

Mikipedia on Intagram: https://www.instagram.com/mikipedi4/

Old: Beosound 9000 mk3, Beolab 3's, Beovision Eclipse, Beolab 1's, Beolab 2, Beovision 10-46, Overture 2300, beolab 8000's, Beolab 4000's, Beovision avant 32" etc. etc.

Michael
Top 50 Contributor
Sweden
Posts 2,578
OFFLINE
Bronze Member
Reply
Michael replied on Fri, Apr 19 2019 10:10 PM
Also found it odd. He seems to be under the impression that the speakers are wrongly designed and that he hasn’t noticed before due to only using them as surround speakers. I also asked if it was the wall mount but he say it isn’t.

Beolab 50, Beolab 8000 x 2, Beolab 4000 x 2, 
BeoSound Core, BeoSound 9000, BeoSound Century, 
BeoLit 15, BeoPlay A1, BeoPlay P2, BeoPlay H9 3rd Gen, BeoPlay H6, EarSet 3i, 
BeoVision Eclipse Gen 2 55", BeoPlay V1-40, 
BeoCom 6000 and so much else :)  

AnalogPlanet
Top 150 Contributor
Vienna, Austria
Posts 678
OFFLINE
Bronze Member
Reply
AnalogPlanet replied on Sat, Apr 20 2019 6:04 AM

Mikipidia:
Tighten the wallmount to begin with? Never heard of this befor... maybe have a look at the speaker fret and see if it has come loose?

...or perhaps one of the end caps is not sitting properly in its place? 

Page 1 of 1 (4 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly