Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Broom from rear BL 4000 conected to 10-46

rated by 0 users
This post has 2 Replies | 0 Followers

liviu_o
Top 500 Contributor
Posts 157
OFFLINE
Bronze Member
Reply
liviu_o Posted: Fri, Nov 30 2012 7:03 AM

Hi!

I have a 10-46 conected to 2 BL 8000 and 2 BL 6000 ( as rear). Since the distance is quite long to rear speakers I have them interconected ( BL 6000). So far so well, everything was working well.

Yesterday I tried to switch the BL 6000 to a pair of BL 4000 using same type of conections and I received a broom from the speakers and a "pop"everythime I change something.

Can you help me why is it happening?

Thank you!

P.S. I changed the type of speakers in bv 10 setup.

liviu_o
Top 500 Contributor
Posts 157
OFFLINE
Bronze Member
Reply
liviu_o replied on Fri, Nov 30 2012 3:55 PM

Nobody encountered this situation?

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Reply
Razlaw replied on Fri, Nov 30 2012 8:10 PM
Are the 4000s newer ice powered versions whereas the 6000s are older non ice powered? If so the cables may be the problem. I have a similar problem if I try to connect my Beolab 9s as rears using the same cables I have for the current (older version) 4000s.

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly