ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Backside view, showing room for adjusting the width by simply modifying the front.
A connector panel you easily can access, not like...
And the bracket is easily exchangeable as well, I will bet other TVs are easily supported!
.. and the connectors from the panel?
kuyttendaele: .. and the connectors from the panel?
I guess that is why there is a pile of "spacers" on the backside, allowing the cable run, even in wall mounted scenario.
BEOVOX141: kuyttendaele: .. and the connectors from the panel? I guess that is why there is a pile of "spacers" on the backside, allowing the cable run, even in wall mounted scenario.
No... I mean.. the connectors from the display to the soundbar.
The connectorspace on the soundbar is ok-ish.. I would have rather seen that they were completely hidden like the back of my BV14.
If they would just hire me to tell them how to make this instead :P
"You think we can slap some oak on this thing?"
kuyttendaele: No... I mean.. the connectors from the display to the soundbar. The connectorspace on the soundbar is ok-ish.. I would have rather seen that they were completely hidden like the back of my BV14.
Don't get me started... I have always felt the extremely distracting black umbilical cord on the Beovisions is a testament to inadequate design. There is absolutely no reason why this couldn't be hidden in the stand especially considering the cost.
What I really like about the canvas is easy access to the connectors (which on most B&O products is a nightmare,) and lots of room to hide any additional junk and wires. I will give you that the BV14 has some of the same properties, but the Eclipse and Harmony are back to the Umbilical cord.
As you know very few people have a convenient slot precut in the floor....
some interesting questions answered within the FAQ section:
https://cdn.shopify.com/s/files/1/0237/5303/1757/files/FAQ.pdf?906
KMA
B&O product history since 1991: Ridiculously long to list in a signature.
They have launched their indiegogo:
https://www.indiegogo.com/projects/canvas-the-ultimate-hifi-upgrade-for-lg-oled-tv/x/23169377#/
What does everyone think?
Ammier: What does everyone think?
I'm tempted, but last time I backed something on Kickstarter, it was delivered 2 years late and $1000 is a lot to ask for a delayed project.
Was very surprised by this: "18 out of 250 claimed"
That's a surprisingly low take-up rate.
I understand that, Ive never been burned with kickstater but know several that have. I am on the fence, my understanding initially was that it would be ready soon. September is quite a way off excluding delays. Its a much nicer solution than the beosound stage... At the moment though, the campaign does not seem to be gaining traction.
World's worst choice of a subject - should have had 'Canvas Audio' in the title!
Anyone remember this project? We all seem to have overlooked it. Would have been a far better option than the B&O CX stand.
Sadly their project didn't get funded as there wasn't enough support. Shame. I guess it had a limited audience and was too expensive to back in advance for most consumers.
moxxey: World's worst choice of a subject - should have had 'Canvas Audio' in the title! Anyone remember this project? We all seem to have overlooked it. Would have been a far better option than the B&O CX stand. Sadly their project didn't get funded as there wasn't enough support. Shame. I guess it had a limited audience and was too expensive to back in advance for most consumers.
As far as I know, this project is not quite dead - there seems to be a version 2 on the way....somewhat slimmer, I was told.
I had the chance to listen to the version here mentioned.
https://lbs.dk/produkt/canvas-audiostand-65/6431
I was impressed - far better than anything similar.....if you count out the B&O solutions.
MM
There is a tv - and there is a BV
Deleted.