Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Schematic for ICEsystem from Beolab 7-4 wanted

rated by 0 users
This post has 12 Replies | 0 Followers

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member
W.Frankenberg / Gandalf Posted: Wed, Oct 16 2019 7:51 AM

hello, is there anyone who has a schematics of the built in BL 7-4 ICE system (ICE250)?

there is only a block diagram and a wire diagram in the service manual.

As a spare part, this board is not listed.

Best regards

wilfried

marexy
Top 150 Contributor
Posts 710
OFFLINE
Bronze Member
marexy replied on Wed, Oct 16 2019 9:10 AM

I think there is no shematics ..

or ..maybe there is but not for public :(

 

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member

oh, that would be a pity.
is there no B & O technician who has ever repaired these boxes and has a copy of the schematics?

wilfried

marexy
Top 150 Contributor
Posts 710
OFFLINE
Bronze Member
marexy replied on Wed, Oct 16 2019 12:05 PM

there is ..but if you know electronic ..go step by step..it can be repaired in component level.

 

leosgonewild
Top 50 Contributor
Helsinki, Finland
Posts 2,373
OFFLINE
Bronze Member
It’s a *** to take apart the components. What are you repairing on it?

"You think we can slap some oak on this thing?"

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member

I'm searching for an error in tweeter connection, the tweeter is ok, but I hear no sound (except the bass)

wilfried

marexy
Top 150 Contributor
Posts 710
OFFLINE
Bronze Member
marexy replied on Wed, Oct 16 2019 12:57 PM

so no soud from tweeter ..zerro..zilch ?

are you 100% that tweeter is ok ?

if so ..check mosfets and resistrors ..ect..

 

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member

marexy:

are you 100% that tweeter is ok ?

if so ..check mosfets and resistrors ..ect..

 

I'm not 100% sure that the tweeter is ok,

have another tweeter (4 ohms) connected, it comes out no sound.

When I short the tweeter I hear the woofer.

wilfried

marexy
Top 150 Contributor
Posts 710
OFFLINE
Bronze Member
marexy replied on Wed, Oct 16 2019 1:28 PM

I am not sure that tweeter 4 ohm is ok.  if it is same as geleraly most of B&O..than is 6 to 7 ohm.

What do you mean short...hope you are not shorten + and -  on tweeter cable.

 

 

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member

marexy:

...

What do you mean short...hope you are not shorten + and -  on tweeter cable.

..

I'm afraid the original tweeter has already done that, it has only about 1 ohm resistance (short circuit!).
Anyway, with this tweeter the bass woofer is active,
only high notes do not come from the tweeter

wilfried

leosgonewild
Top 50 Contributor
Helsinki, Finland
Posts 2,373
OFFLINE
Bronze Member
Tell me if you need a new 7.4

I have one extra.

"You think we can slap some oak on this thing?"

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member

I send you an email

leosgonewild:
Tell me if you need a new 7.4

 

I have one extra.

 

wilfried

leosgonewild
Top 50 Contributor
Helsinki, Finland
Posts 2,373
OFFLINE
Bronze Member
Never got any email.

"You think we can slap some oak on this thing?"

Page 1 of 1 (13 items) | RSS