Beosystem 2500 does not work with remote

Hi all,

My Beosystem 2500 does not react on any remote. I have tested it with a BL1000, a BL4 and a Beo 5. The led on the system does not react. Batteries of the remotes are full and are working with other B&O stuff.

The system works well when the keys are touched on the system by hand.

The Beosystem is a stand-alone device. Only a BG 3300 with preamp is connected. The powerlinksocked is used and connected to a Audiolab 8200P poweramp to drive passive speakers.

Any suggestions?

Thanks in advance.

Beofan53

I think you have to change the option setting of your Beosytem using your remote. I'm sure someone else can tell you how to do that!

There is actually a functionality to turn off the remote function, I noticed that by mistake when I added my Beosound 2300 without any speakers in the Beo5 config. So it is not necessarily a malfunction.

At the moment, I do not remeber how I did it though but I bet I found the answer on this site.

 

(one thing you could try if you have a Beo5 + config tool is to add it to a zone with speakers - might work)

On the Beolink 1000, SOUND 1 STORE.

Might work!

THIS WORKED FOR ME!!!!

on a beosystem 6500, with the beolink 1000

THANK YOU SO MUCH