Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BeoLab 6000: which connector on the PCB is audio-IN from cinch?

rated by 0 users
This post has 4 Replies | 1 Follower

KolfMAKER
Top 500 Contributor
The Netherlands
Posts 176
OFFLINE
Silver Member
Reply
KolfMAKER Posted: Sun, Apr 19 2020 9:30 AM
PCB overview.jpg

Which of the connectors on the BeoLab 6000 PCB, is the audio-IN connector coming from the cinch plug in the foot?

 

  • Is it P003, P004?
  • Which wire is Left/Right/Ground?

(Click on picture to see PCB overview)

 

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member
Reply
W.Frankenberg / Gandalf replied on Sun, Apr 19 2020 12:58 PM

the Beolab 6000 is a MONO speaker!

With the input selector switch you can select the left or right channel or PHONO offered via Powerlink.

The audio signal arrives on the main board at P3 pin 1, pin2 is Signalground!

 

the stereo amplifier block is responsible for the bass and treble amplification, for only one channel!

wilfried

KolfMAKER
Top 500 Contributor
The Netherlands
Posts 176
OFFLINE
Silver Member
Reply
KolfMAKER replied on Sun, Apr 19 2020 2:46 PM

Thnx for responding Wilfried.

So this must be connector P003 on the mainboard PCB?

KolfMAKER
Top 500 Contributor
The Netherlands
Posts 176
OFFLINE
Silver Member
Reply
KolfMAKER replied on Sun, Apr 19 2020 2:46 PM

Thnx for responding Wilfried.

So this must be connector P003 on the mainboard PCB?

W.Frankenberg / Gandalf
Top 500 Contributor
Heilbronn / Germany
Posts 290
OFFLINE
Bronze Member
Reply
W.Frankenberg / Gandalf replied on Sun, Apr 19 2020 4:35 PM

Yes

wilfried

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly