ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
BV Harmony 65 / Eclipse 55 / BL 50 / 19 / 18 / BS 2 all brass
BV Horizon 48 / V1 40 / BL 17 / Beoplay S3 all black
V1 / BL 3 / BS Essence MKII / Beoplay A3 all white
BS Moment / BS 3000 / BS 3200 / BL 400 all silver
Headphones / bluetooth speakers / BLC NL-ML / BLGateway
I know…B&O virus has grown on me !
I've found that completely removing the power for a good length of time can sometimes help with an NL/ML Converter isn't responding.
beojeff:I've found that completely removing the power for a good length of time can sometimes help with an NL/ML Converter isn't responding.
Fansastic: beojeff: I've found that completely removing the power for a good length of time can sometimes help with an NL/ML Converter isn't responding. I’ll try that, thanks and hope this fixes it because tried everything els that seems logical to my limited IT knowledge
beojeff: I've found that completely removing the power for a good length of time can sometimes help with an NL/ML Converter isn't responding.
Fansastic:Yes I did multiple times. No result, keeps flashing green
Carolpa:Also with only the mains connected?
Fansastic: Carolpa:Also with only the mains connected?Yes
Carolpa:I had the same experience twice, but in the end with accurately following the procedure in the picture, I always managed to bring the BLC back alive/operational.