Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BeoLab 6000: is there 5 volt on the PCB?

rated by 0 users
This post has 2 Replies | 1 Follower

KolfMAKER
Top 500 Contributor
The Netherlands
Posts 176
OFFLINE
Silver Member
Reply
KolfMAKER Posted: Sat, May 30 2020 8:17 PM

Hi,

For a DIY project I want to add a Bluetooth module inside the BeoLab 6000 casing.
This module needs 5 volt DC (with 700 to 1000 mAmp)  input.

So, is there any place on the PCB where I could use 5 volt to connect to the bluetooth module?

Fritz
Top 500 Contributor
Posts 272
OFFLINE
Bronze Member
Reply
Fritz replied on Sat, May 30 2020 9:24 PM

Hi

Have a look in the servicemanual.
However the answer is no.
BL 6000 was made before the 5 volt "World"
Brgds Fritz

 

 

KolfMAKER
Top 500 Contributor
The Netherlands
Posts 176
OFFLINE
Silver Member
Reply
KolfMAKER replied on Sun, May 31 2020 8:57 AM

Thnx Fritz

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly