Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beoplay V1-40, setting up the RJ45 PL ports

rated by 0 users
This post has 1 Reply | 1 Follower

Ajes0101
Not Ranked
Posts 1
OFFLINE
Bronze Member
Ajes0101 Posted: Wed, Jun 24 2020 9:37 PM

Hi.

 

How do you route or setup the RJ45 (powerlink??) ports to route the TV here and out for external speakers.

 

In settings - Speakergroups you can select the PL 1 -1 and PL 1-2 and choose amongst a list of BEO speakers.

 

I want the TV sound out here as a line signal, nothing fancy. Tryied selecting other and line, didnt work.

 

Can anyone help or suppy a guide?

 

Thanks a lot.

 

Best

Fansastic
Top 150 Contributor
The Hague, The Netherlands
Posts 768
OFFLINE
Bronze Member
Fansastic replied on Wed, Jun 24 2020 10:31 PM
Hi there, can you give more details what you try to setup?

The powerlink output is meant for beolab speakers which are active speakers. You can select the output chanel to be line out but then you need to connect it to a amp and from there on to speakers.

The V1 is still a very nice tv and if you do not have beolabs I would strongly recommend you to get a good pair secondhand. To start with the Beolab 4000’s are great. Be aware that the sound processing (dolby surround and true image upmixing) and setup possibilities in the V1 are very very good and it is a waste if you do not use the maximum out of it.

Hope this helps

BV Harmony 65 / Eclipse 55 / BL 50 / 19 / 18 / BS 2 all brass

BV Horizon 48 / V1 40 / BL 17 / Beoplay S3 all black

V1 / BL 3 / BS Essence MKII / Beoplay A3 all white

BS Moment / BS 3000 / BS 3200 / BL 400 all silver

Headphones / bluetooth speakers / BLC NL-ML / BLGateway

I know…B&O virus has grown on me ! 

Page 1 of 1 (2 items) | RSS