V.MEM sound not showing up on 3200

Hello. 

I am hoping someone can help me resolve this.

Room A: I have a BV4-65 connected to a BeoSystem 3. 5 speakers. Also connected to the BeoSystem 3 is an AppleTV (accessed as V.MEM on remote).

Room B: I have a BeoSound 3200 (with integrated speakers) which has a BeoLab 2000 as well. 

The 3200 and BeoSystem are connected with MasterLink. 

I am able to listen to music playing on the 3200 on the speakers in room A.

I also can listen to TV sound on the 3200.

What I can not seem to be able to do is listen to the AppleTV sound on the 3200. When I select LIST > AV > V.MEM at the 3200, what shows on the 3200 is V.Tape and no sound. Again, if I select TV at the 3200, I get TV sound but it does not seem to pipe in the V.MEM (AppleTV) sound.

I hope I have explained this well and that someone can help. Thanks for your help.

Hello AymanG,

you have to connect your ATV also analogue, not only via HDMI. Therefore you need a digital-to-analogue converter: optical wire from ATV to converter and two cinch cables from converter to BS 3.

Regards

Räuber

Thank you Räuber for you reply. The cinch cables.. where do I connect them to on the BS 3? Do I need to configure in BS 3 settings?

Thank you again.

 

AymanG

 

You can use a scart connection with an adapter like this:

http://www.amazon.de/mumbi-SCART-AV-Adapter-Umschalter-In-Out/dp/B003JGQFFG/ref=sr_1_1?ie=UTF8&qid=1358284407&sr=8-1

/Räuber

Why not use one of the AV-sockets without scart, but with L/R RCA sockets?