Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Help! Light commando stopped working in Beovision 7-50!!

rated by 0 users
This post has 1 Reply | 1 Follower

jg1976
Not Ranked
Posts 63
OFFLINE
Bronze Member
jg1976 Posted: Thu, Oct 29 2020 6:34 PM

Before I had Masterlink Gateway and used Light commando to switch on lights etc every evening..It worked flawlessly.. 

I then installed Beolink Gateway (disconnected my Masterlink) and installed all scenarios again. It worked for a while, then light-commando stopped working.. 

I restarted the beolink and it started to work again but only for a while.. 

I have 10 zones, mostly with older Masterlink-products, but also a netlink converter and a Beovision 11-46 in my bedroom.

Everything is wired with RJ45 cat7.. 

 

 

Khimo Support
Top 500 Contributor
Posts 181
OFFLINE
Bronze Member

Hi jg1976,

What firmware do you have on the BLGW, and what ML products?

Page 1 of 1 (2 items) | RSS