Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BeoVision Avant 55 transit brackets

rated by 0 users
This post has 5 Replies | 0 Followers

andydc
Not Ranked
Posts 3
OFFLINE
Bronze Member
Reply
andydc Posted: Mon, Dec 7 2020 10:33 PM

Hi,

I've purchased a second hand BeoVision Avant 55. It was delivered via a BEO store for myself to set up. Looking for advice please on how to remove transit brackets as I've no idea how they come off!!

 Brackets/supports as photo.

 

Champbeo
Not Ranked
Posts 43
OFFLINE
Bronze Member
Reply
Champbeo replied on Mon, Dec 7 2020 11:27 PM

Pull straight down. Use a bit of force. That should do it. 

Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 14,680
OFFLINE
Gold Member
Reply
Millemissen replied on Tue, Dec 8 2020 11:33 AM

And don’t forget to remove the two screws for tightening up the speaker box.....if they are there (which is not always the case).

MM

There is a tv - and there is a BV

andydc
Not Ranked
Posts 3
OFFLINE
Bronze Member
Reply
andydc replied on Tue, Dec 8 2020 4:54 PM

Thanks Champbeo, I'll give it a go when it's on the stand. Just waiting on a power lead!

andydc
Not Ranked
Posts 3
OFFLINE
Bronze Member
Reply
andydc replied on Tue, Dec 8 2020 4:55 PM

Thanks MM, they're not there! Hope speakers will still be ok!

Gregg
Top 500 Contributor
Colorado USA
Posts 143
OFFLINE
Gold Member
Reply
Gregg replied on Thu, Dec 17 2020 7:58 AM

I was utterly flummoxed by this too, and disassembled some of the housing on the TV to figure it out; and failed. As champ said, yank them down hard. 

Page 1 of 1 (6 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly