Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 2 turning off and on and repeat with non-B&O amplifier

rated by 0 users
This post has 2 Replies | 0 Followers

chickenceo
Top 500 Contributor
Posts 90
OFFLINE
Bronze Member
Reply
chickenceo Posted: Sun, Jan 3 2021 3:20 PM

I am connecting my BL 2 to a Marantz AV amp with a trigger box that I used for my BL 10 in the past. When I turn on the amp, the BL 2 turns on no problem. But when I turn off the amp, the BL 2 turns itself off after awhile, but immediately it will turn on again, this off and on cycle will repeat itself since there is no signal coming from the amp. Does anyone knows where might go wrong?

Thanks!

BL8000, BL10, BL4000, BL2, BL3 (Sold), Beocentre 2 (Sold), Beosystem 3, LG C8

Bw789
Not Ranked
Posts 74
OFFLINE
Bronze Member
Reply
Bw789 replied on Sun, Jan 3 2021 11:04 PM
Does it still do it if your amp is turned off at the mains? Sounds to me like the amp is still sending a trigger signal.
chickenceo
Top 500 Contributor
Posts 90
OFFLINE
Bronze Member
Reply
chickenceo replied on Mon, Jan 4 2021 7:20 AM

Good point. I fiddled around and it seems the problem lies with the ATV 4K which is the only input source. If I exit the ATV4 properly, ie menu back to home screen before shut off the system, the BL2 turns off properly. Why is that I dont know, but at least its working now. Thanks! 

BL8000, BL10, BL4000, BL2, BL3 (Sold), Beocentre 2 (Sold), Beosystem 3, LG C8

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly