Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beocenter 9500

rated by 0 users
This post has 2 Replies | 0 Followers

manyaksh
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
manyaksh Posted: Mon, Jan 4 2021 11:32 AM

Hi Happy New Year !

I have a Beocenter 9500 which was not used for long time. recently I wanted to play it and when switched On there was smoke from CD Servo PCB 30 and upon inspection I saw Resistor 3107 and 3108 burnt 4.7 Ohms. What is the cause of it. How to make it work again. Any help would be highly appreciated.

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Mon, Jan 4 2021 12:16 PM

Seized spindle motor?
Will it rotate easily by hand?

Martin

auric
Top 500 Contributor
Posts 90
OFFLINE
Bronze Member
Reply
auric replied on Wed, Sep 29 2021 5:18 AM

I have the same problem. The DC motor is not seized and works fine. It also took out the servo and decoder board.

Does anyone here know anyone who can do board level repairs on the decoder card / servo card for the CD mech?

I sent it an authorized B&O service center, 9 months later they told me that it can't be fixed.

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly