ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
As per my previous thread...my beovision was damaged by a lizard crawling into the tv......B&O quoted a horrendous amount for the repair (which they are entitled to do). I had a technician from Yamaha come and look at the tv and he repaired on the spot for R600.00 which is about 46.15 pounds!! B&O wanted to charge me 750 pounds for the board alone!! So I'm so happy.
My question is, I have my Beolab 8000 speakers connected to the tv but I am wanted to also connect my Beosystem 3500 to the Beolab 8000 speakers....is there anyway of doing this? Can't use masterlink as the Beosystem does not have that.
Any help greatly appreciated as usual.
Thanks
Ben
Should work via a Beolink Converter (1611), integrates TV and Beomaster.
Take a look HERE or HERE for more information.
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Sorry more questions!! Well after the tv was fixed...I found out the Beolab 7.1 was also damaged by a lizard.....short circuited the board and so I had the joy of removing the remains of another charred lizard.
I have connected my Beolab 8000 speakers to the TV. When using DVD the sound is good but when playing a CD the sound is not half as nice as when the speakers were connected to my Beosystem 3500. Is that normal, mainly it lacks bass? I connect the speakers to two powerlink sockets on the far left of the tv not the ones that are for surround sound. Is that correct?
Sorry this is my first Beovision and didn't realise I had so much to learn!!!
Thanks so much
BenSA: ...the Beolab 7.1 was also damaged by a lizard.....
...the Beolab 7.1 was also damaged by a lizard.....
seriously??
where did it get in to the 7.1? was it an outdoor tv before?
hope you have the same luck in repairing the speaker as with the TV
cheers
I bought from a lady who obviously was over run with them. It got in via the two back holes.....bass expander holes?
Just ridiculous!!
Ben, I think you should read the manuals (set-up/reference)...
It should be on the B&O Website.
Also, try different speakers options (tell the tv you got the speakers, then select SPEAKER 2 or 3 for 2 or 3 speakers).
BenSA:I bought from a lady who obviously was over run with them
You might be getting a phone call any day now from the lizard lady looking for her pets :-)
valve1: BenSA:I bought from a lady who obviously was over run with them You might be getting a phone call any day now from the lizard lady looking for her pets :-)
She must stay away from me and my house!!! The Tv and Beolab were fully of lizard droppings too!
There are definitely some very odd people in this world!