ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
got my stereo out of storage, hooked it all up lit up and everything, but the volume is not working almost like it is stock just of mute turning up and down the volume will show the lines but the volume out of speakers are the same. tried a pair of headphones same deal. speaker I am using is the Beovox 802S. I had this in storage for 15 years. Hope somebody can help or point me in some direction.
Check the 100uF capacitor at the volume IC.
Martin
I am looking at this tearing my hair out. Is it possible you can give me the number of the capacitor. I can see number c22 is 100uf and number c50 is 100uf sorry for sounding ignorant, I would send it out to be fixed, the closest store is 650 km from here and when I phoned them they said they didn't work on old junk. I am a motorcycle mechanic so I know how to solder a new component on the board.
C30.It sits from 2IC4 pin 1 to ground.
Thank you so much. I just noticed you are a Dane Tusind tak for hjælpen. Niels
Thank you so much, Just noticed you are Danish. Tusind tak for hjælpen