Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 8000 MK1

rated by 0 users
This post has 2 Replies | 1 Follower

mokummer
Not Ranked
Posts 5
OFFLINE
Bronze Member
Reply
mokummer Posted: Fri, Apr 2 2021 8:37 AM

Changed the foam and repaired the power board after the old foam damaged the printed circuit . But is not getting from stand-by anymore so only the red led burning and the relay is not coming in . Switched the power-board with my  good amplifier board from the other dismantled Beolab but works okay together . So my problem must be in the other original amplifier board . So any idea's where to look at now ? Before dismantling and the repair off the power board this Beolab was normal working . Thanks Smile

mokummer
Not Ranked
Posts 5
OFFLINE
Bronze Member
Reply
mokummer replied on Fri, Apr 9 2021 8:17 AM

Problem solved and TR11 was the problem . Beolab in working order again Smile

Johan
Top 200 Contributor
Bolsward, NL
Posts 450
OFFLINE
Gold Member
Reply
Johan replied on Fri, Apr 9 2021 9:06 AM

Good to hear - beautiful speakers well worth fixing!

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly