BeoVox HT500 - Speaker replacement for broken Tweeter ?

Reply

KolfMAKER Posted: Wed, Jun 9 2021 11:31 AM

rated by 0 users

BeoVox HT500 - Tweeter Close-up (S).png

In my BeoGram 1500 restoration project, I also have 2 BeoVox HT500 speakers. These have a Low/mid-tone speaker and a seperate Tweeter.

All speakers are in bad condition and need replacements. For the Low/Mid-tone speakers I already found replacements. For the Tweeters I did not find replacements yet.

Specification wise, I only know this (see attached picture):

• 4 ohm tweeter
• Outside dimension 65 x 65 mm

Question

• Who has information about good replacements?
• Tweeters close to the sound of the original, and fitting in the casing. 

Reply

Dillen replied on Wed, Jun 9 2021 11:47 AM

rated by 0 users

Are they all bad?
How?

Martin

Reply

KolfMAKER replied on Wed, Jun 9 2021 12:14 PM

rated by 0 users

Unfortunately, 3 of the 4 speaker drivers are bad.

The Low/Mid-tone speakers: the conus paper has been wet and now is deformed. The edged are in some spots completely worn out and have been ripped.

One of the tweeters has torn conus paper, and is heavily damaged on the edge. Therefor, I would like to replace them both for sound consistency.  

Reply

Dillen replied on Wed, Jun 9 2021 2:28 PM

rated by 0 users

Here?

Beovox Tweeter 8480007 | Beoparts

Martin

Reply

KolfMAKER replied on Thu, Jun 10 2021 9:00 AM

rated by 0 users

Thnx Martin

I sent you an email about this.