Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 12-3 and Essence mkII odd noise when changing volume

rated by 0 users
This post has 2 Replies | 0 Followers

j_lowry
Not Ranked
Posts 18
OFFLINE
Bronze Member
Reply
j_lowry Posted: Fri, Nov 5 2021 7:17 PM

Strange noise issue

When changing the volume level using airplay on the Beosound Essence there is a brief buzzing sound on the Beolabs. Ive tried a different Essence and it does the same thing. If I unplug the powerlink cables on the back of the essence and replug them back in then the noise issue goes away but comes back eventually. I'm using cat6 cables if that makes a difference

Otherwise they play music just fine. Any ideas?

 

lawrencejmcook
Top 150 Contributor
Posts 742
OFFLINE
Founder
Reply
lawrencejmcook replied on Fri, Nov 5 2021 8:40 PM
I think that the minimum standard for RJ45 cables is CAT 7 (the shields run plug to plug).

Have you tried using either CAT 7 or B&O official RJ45 Powerlink cables?
Mikipidia
Top 50 Contributor
Posts 2,169
OFFLINE
Bronze Member
Reply
Mikipidia replied on Fri, Nov 5 2021 8:50 PM
Its a bad ground in the wire, had that too before. Doesn’t do any damage. But the seating on the back of the speakers may be a little loose, or on the essense.

New: Beovision Harmony, Beolab 50's, Beolab 28's, Beolab 18's, Beolab 17's, Beosound Stage & LG, Beosound 2, Beoplay M3, Beoplay A1, Beoplay Portal, Beoplay H4 gen 2, Beoplay E8 3.0

Mikipedia on YouTube: https://www.youtube.com/c/Mikipedia

Mikipedi4 on Twitch: https://www.twitch.tv/mikipedi4

Mikipedia on Intagram: https://www.instagram.com/mikipedi4/

Old: Beosound 9000 mk3, Beolab 3's, Beovision Eclipse, Beolab 1's, Beolab 2, Beovision 10-46, Overture 2300, beolab 8000's, Beolab 4000's, Beovision avant 32" etc. etc.

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly