ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi beoworld,
I have recently bought a Stage and I noticed that when the product is in standby there’s a very low continuous buzzing noise coming from around the area where the LEDs and buttons are located.
This does’t happen if the product is ON. Only when I put it in standby the buzzing starts right after the speakers shut off.
It’s very annoying because I have it in my bedroom and I can hear the noise at night while going to sleep.
I tried different mains cable and outlets around the house. Also tried both wired and wireless connection.
Is it normal or should I return it?
Thank you and Merry Christmas!
mine also have some really not noticable noise when in standby, but I have it in my living room so not really bothering me at all.
Thanks for the response. Mine is located in a small 15sqm bedroom, dead silent during nighttime. Hopefully that standby buzz it’s not a generic issue.
I’ll plan a visit to the store and probably return it if the one on display buzzes too in rstandby.
I have two BS stages. One in the bedroom and one in the study. Both make no noise.
BeoVision 7-40 HD-Modul, BeoViision 11-40, BeoVision 8 32" white + Floor Stand, 2x Apple TV 4 mit Kodi, DVD2, HDR2, BeoSound 9000 MKIII White Edition, 2x BeoSound Moment + Floor Stand, 2x BeoSound Stage, BeoSound Core, BeoSound 35 brass, BeoSound 1 MKII + Floor Stand, 2x BeoSound 3, BeoSound 6, BeoSound 3200, BeoSound Essence , BeoPlay A9 Nordic Sky twilight, BeoPlay A8 MKII white + Floor Stand, BeoPlay A2 grey, 2x BeoPlay A3 white/bright blue, BeoPlay A1, 2x BeoPlay S3 white, Beolit 12 (White Edition), Beogram TX2, BeoLab 5, BeoLab 3, BeoLab 7-4, BeoLab 8000 MKII, Beolab 11, 2x BeoLab 3500, 4x LC2, 4x Beo4 - MK1-3, BeoRemonte One BT, 2x BeoRemonte Halo, Audio Terminal, Beolink 1000, BeoLink 7000, 2x EarSet A8, 3x A9 Keyring, EarSet 2, Form2, BeoPlay H6, 3x BeoTime, Beowatch, 2x Lightmanager Pro+ B&o Version, 4x BeoCom5, Beoline2, 3x Speakerphone, BeoTalk 1200, 5x Cabinets, MLGW, BLGW,
perhaps stupid question but are you sure it is really on standy by and not a mute? Happed to me one time.
Thanks for the answers. No, the buzz starts right after I put it in standby.
If the music is MUTED there’s no noise. I can only hear the hiss from the amplifiers and that’s normal.
This might be a grounding issue with my place. But I have other BO products like Core+BL17+18+19 that don’t buzz. Even my old Beolit 12 that caught a few rains outside doesn’t complain.
I will investigate and write back here.