ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi Everybody
I have an old Beovision 7 that is outdated and in my region unsellable.
So I am thinking..... Why not take the surround sound module and convert it to at module for my new tv (non B&O) and I will be able to continue using my speakers?
I took the TV apart and found the DSM module (#B6143052).
16 Pin connector, named P12 (Found this info in the service manual):
16: Out TV Right
15: Out TV Left
14: GND
13: In Right
12: In Left
11 to 7: GND
6: 14V in
5: 14V in
4: Sound mute
3: PL_Data
2: SDA
1: SCL
An additional connector on the board for SPDIF called P411 (On the board it is labelled P410)
Does anybody have information about the protocol to use to communicate with the board via SDA and SCL?
Maybe somebody already made this project and I would be very fund to hear about it.
Likevise, ideas and comments are very welcome.
Best hopes
Henrik M.
Sorry I have no information on this subject