ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi to everyone how are you all.
Maybe someone had had the same problem as i encounter and may be of help.
My beogram 9500 plays well, does everything but fails to play with the datalink.
when pressing play on beogram amp (beocenter 9500) does not come on.
when pressing phono beogram stays dead also.
the two pins are in place, swapped them also but to no reveal.
checked the little board and flat wire to the main board and everything is good.
after that i got lost and do not know where to look anymore.
btw i also placed a new transistor right after that flatwire connector on the mainboard too.
Still no reaction from eachother.
Can anyone shed a light on this?
thanks in advance.
Steven