Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Ouverture door adjustment

This post has 1 Reply | 0 Followers

francis
Not Ranked
Posts 72
OFFLINE
Bronze Member
francis Posted: Wed, Feb 23 2022 3:17 PM

Hi,

After the doors of my overture only opened or closed completely sporadically over the years, I have successfully replaced the drive belt of the door mechanism.The opening and closing is now basically as expected again.

However, when closed, a gap of almost one centimeter remains between the doors. I realize that the gap is not normally zero, but something less would obviously look better.

Can anyone tell me how and where this might be adjusted?

Thanks already for any hints,

Francis

Ravsted
Top 200 Contributor
Denmark
Posts 345
OFFLINE
Bronze Member
Ravsted replied on Wed, Feb 23 2022 3:55 PM

Look on YouTube.

I followed this guide once. 

https://youtu.be/1E3BKTSz9wA

Page 1 of 1 (2 items) | RSS