Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Connecting BeoLab 11 to Playmaker

rated by 0 users
This post has 2 Replies | 1 Follower

djs
Not Ranked
Posts 27
OFFLINE
Bronze Member
Reply
djs Posted: Thu, May 2 2013 10:27 AM

I have BeoLab 3s connected to Playmaker.  All good so far.  Now I would like to add my BeoLab 11 to this setup.  I have read the manuals for the subwoofer and the Playmaker but cannot understand how they connect.  I am confused because the manuals seem to suggest that the source (in this case, Playmaker, requires a Powerlink socket).

Can someone explain in simple terms for me?

hfat
Top 150 Contributor
Vienna, Austria
Posts 663
OFFLINE
Bronze Member
Reply
hfat replied on Thu, May 2 2013 11:26 AM
BL11-Stereo.JPG

To add a BL11 to your Setup you have to refer to the following picture taken from BL11 guide.

You run one of your existing cables from Playmaker to BL3 to BL11 (RJ45 to Powerlink) and disconnect the second RJ45 to Powerlink cable from Playmaker..

Then you connect both BL3s via Powerlink to BL11 and set BL11 to internal bass management.

hfat

djs
Not Ranked
Posts 27
OFFLINE
Bronze Member
Reply
djs replied on Fri, May 3 2013 7:06 AM

Thank you hfat.  

djs

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly