beogram 7000 lifting up the plate

Reply

erandlux Posted: Mon, Jul 8 2013 8:30 PM

rated by 0 users

Hi guys,

I just receive my beogram 7000, but it sems the plate is too low in reference too the chassis.

when the arm arrives in the middle of the record, I have a griny sounf like if the metallic plate was scratching against the chassis.

I have red a post with the same problem on a beogram 6500, but it seems it is not the same way to solve the problem.

there is certainly a way to rise up the plate, but could not find it

thanks for your help

Eric

Reply

Peter replied on Mon, Jul 8 2013 9:04 PM

rated by 0 users

1. Check the transit screws are released.

2. Check the carriage is properly located on the rails.

3. If the platter is still too low, adjust the leaf springs - if necessary a slight tweak upwards should suffice.

The 7000 is identical to the 6500 except for the badge.

Reply

erandlux replied on Mon, Jul 8 2013 9:35 PM

rated by 0 users

OK, i found them.  The L screws, not the M  Grrr

http://archivedforum2.beoworld.org/forums/p/5351/48110.aspx#48110

it works good.

I will clean my records, and enjoy.

thanks

Eric